Prolific English designer Paul Fisher at Selway Fisher has some new stock canoe designs of interest to Proafile readers:
18’ stitch and tape Waka Ama (Hawaiian outrigger canoe) LOA 18’ (5.49m); Main hull beam 1’7” (0.49m); Overall beam 5’11” (1.8m) Approx. wht 140 lbs (64kg) in 6mm ply.
Tikopian 24 - based on the 18’ Waka Ama and uses the same stitch and tape plywood construction process. She has 4 seats plus stowage compartments…
Chris Luomanen describes the world’s first and only proa on wheels!
The land proa was a mad last minute dash to the finish for 2 quarters worth of thesis work I did around "Joy Rides". The idea was to create unexpected experiences—things you had to try to understand. All of these were developed as working prototypes. The projects included:
Centipede Board: a skateboard with 11 fixed roller blade wheels on the bottom that you turned…
Sam Frosh’s practical sailing experience leads him to believe that the tacking proa is not a realistic or sensible design when used in higher winds.
In September I had my contribution appear in Proafile regarding the design and construction of my tacking proa or more correctly, outrigger sailing craft. Since that article I have sailed my boat in the strongest wind conditions that I had taken it out thus far, around 18 to 20 knots.…
Sam Frosh reports on the design and construction of an outrigger Moth!
After more than two decades sailing, designing and building sailboards including a six metre long tandem I decided to go back to my sailing roots, that is a Moth dinghy. However I needed a craft for two as my son has accompanied me on my sailing journey for the last 20 years. The other problem was that when I last sailed Australian Moths they were 1.3 metre wide…
Contributed by Chris Ostlind. Chris is a performance small craft designer/builder in Salt lake City, Utah. See more of his designs at Watertribe.
PB Racer is a sail/paddle kayak double for expedition adventure races such as the Watertribe Everglades Challenge. I pulled the basic hull form from an expedition double I had designed to see how well the form could be adapted to a concept boat of this type. I just gave it a transom and some…
James Wharram Designs has announced the completed prototype of a new production moulded GRP catamaran: the Tiki 8m by Multimarine Composites Ltd. “The design features gently curved V section canoe hulls with stern hung rudders on skegs. A wingsail sloop rig with boomless mainsail provides a low centre of effort for increased stability. With a trampoline forward, and GRP bridgedeck tray with self draining trampoline seats, it also has a…
Manu Kai [Bird of the Sea] is a voyaging double canoe: a sailing catamaran for raids, beach cruising, and coastal sailing. It’s designed to be simple, tough, swift, safe, environmentally friendly, and economical to own and to manufacture. It is the sort of small cruiser that I wish were on the market—that Hobie Cat® would make.
LOA: 23’
Beam (sailing): 12’-0”
Beam (trailer): 8’-6”
Weight (approx): 750 lbs.
Draft: 1’-11”
SA: 205 sq.…
